There are various sources of contamination that result in the presence of harmful bacteria, viruses or fungi in most vast water-bodies. In the past, environmental watch groups have strongly criticized the waste disposal policy of most multi-national firms especially those that dispose untreated waste in water bodies. In the recent past, increased cases of contamination have resulted in the springing up of water testing labs in major urban and semi-urban areas.
Many are the times when the minerals found in water react with the household plumbing materials and service lines therefore resulting in the corrosion of the piping system. As a consequence, lead which is harmful and therefore poses a health hazard is deposited in the storage facilities alongside the water. Just as a precautionary measure, most laboratories test for the presence of lead as part of regular monitoring procedures.
The test results arrived at help the analysts to understand better the system as a whole unlike gaining knowledge on an individual household. Raw-water is not safe for human consumption and therefore one has to rely on the use of pitchers and faucets to filter off unwanted matter. The many counterfeit product in the market make it difficult for one to pinpoint the genuine filter.
Detecting quality problems is an easy process. Factors to look out for include the color, odor and whether any stains occur on clothes washed using this commodity. Contamination easily occurs if the well is too near a septic system. If this is the case, one has to carry out regular checks on the septic systems so as to ensure they are not leaking.
After carrying out the tests, many laboratories have to file their findings with the federal, state or tribal water agencies that are responsible for monitoring public water systems. They have a requirement to report any contaminants found and recommend best ways of ensuring safety of this commodity. The quality engineers have to generate an annual consumer confidence report that is distributed to all stakeholders. Its key contents include the technician findings and the possible health effects.
The quality record has to be regularly updated as it may come in handy in solving any future problems and in claiming compensation if any damages occur to your system. The tests should be carried out at least once per year. Detailed testing should be conducted on the presence of total coliform bacteria, dissolved solids, nitrates and the PH levels especially if the well was recently dug or there has been a major overhaul of the plumbing system.
If the family is expecting a new baby, tests for presence of nitrates should be carried out during pregnancy, before the infant is brought home from the hospital and during the first half year of the young ones life. The test is most effective if carried out during summer or spring that is after a rainy period.
Water testing labs should test for the presence of minerals salts such as chloride, manganese and iron which might have easily corroded into the system. These tests need to be repeated after every three years. Testing for volatile organic compounds can be very expensive and therefore such tests should be limited to only when necessary.
Many are the times when the minerals found in water react with the household plumbing materials and service lines therefore resulting in the corrosion of the piping system. As a consequence, lead which is harmful and therefore poses a health hazard is deposited in the storage facilities alongside the water. Just as a precautionary measure, most laboratories test for the presence of lead as part of regular monitoring procedures.
The test results arrived at help the analysts to understand better the system as a whole unlike gaining knowledge on an individual household. Raw-water is not safe for human consumption and therefore one has to rely on the use of pitchers and faucets to filter off unwanted matter. The many counterfeit product in the market make it difficult for one to pinpoint the genuine filter.
Detecting quality problems is an easy process. Factors to look out for include the color, odor and whether any stains occur on clothes washed using this commodity. Contamination easily occurs if the well is too near a septic system. If this is the case, one has to carry out regular checks on the septic systems so as to ensure they are not leaking.
After carrying out the tests, many laboratories have to file their findings with the federal, state or tribal water agencies that are responsible for monitoring public water systems. They have a requirement to report any contaminants found and recommend best ways of ensuring safety of this commodity. The quality engineers have to generate an annual consumer confidence report that is distributed to all stakeholders. Its key contents include the technician findings and the possible health effects.
The quality record has to be regularly updated as it may come in handy in solving any future problems and in claiming compensation if any damages occur to your system. The tests should be carried out at least once per year. Detailed testing should be conducted on the presence of total coliform bacteria, dissolved solids, nitrates and the PH levels especially if the well was recently dug or there has been a major overhaul of the plumbing system.
If the family is expecting a new baby, tests for presence of nitrates should be carried out during pregnancy, before the infant is brought home from the hospital and during the first half year of the young ones life. The test is most effective if carried out during summer or spring that is after a rainy period.
Water testing labs should test for the presence of minerals salts such as chloride, manganese and iron which might have easily corroded into the system. These tests need to be repeated after every three years. Testing for volatile organic compounds can be very expensive and therefore such tests should be limited to only when necessary.
